Portal de Transparencia

Actividad investigadora:

• Artículos en revistas
  • [2019] A Multi Material Shell Model for the Mechanical Analysis of Triaxial Braided Composites (vol 24, pg 1425, 2017)
  • [2019] An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography
  • [2019] An analysis of void formation mechanisms in out-of-autoclave prepregs by means of X-ray computed tomography
  • [2019] Dynamic characterisation of interlaminar fracture toughness in carbon fibre epoxy composite laminates
  • [2019] Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils
  • [2019] Multiscale modelling of thermoplastic woven fabric composites: From micromechanics to mesomechanics
  • [2019] Relations between intralaminar micromechanisms and translaminar fracture behavior of unidirectional FRP supported by experimental micromechanics
  • [2019] Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method
  • [2019] Thermal oxidation of PEPA-terminated polyimide
  • [2018] A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws
  • [2018] A numerical framework to analyze fracture in composite materials: from R-curves to homogenized softening laws
  • [2018] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016)
  • [2018] Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves
  • [2018] Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves
  • [2018] Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
  • [2017] A Multi Material Shell Model for the Mechanical Analysis of Triaxial Braided Composites
  • [2017] A Multi Material Shell Model for the Mechanical Analysis of Triaxial Braided Composites
  • [2017] Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions
  • [2017] Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions
  • [2017] Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects
  • [2017] Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects
  • [2017] Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium
  • [2017] Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
  • [2017] Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
  • [2017] Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
  • [2017] Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten
  • [2017] Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
  • [2017] Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg
  • [2017] Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
  • [2017] Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
  • [2017] Structural composites for multifunctional applications: Current challenges and future trends
  • [2016] CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain
  • [2016] Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
  • [2016] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
  • [2016] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
  • [2016] Dual scale vacuum infiltration of fiber- reinforced composites: from in situ synchrotron experiments to numerical simulations
  • [2016] Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip
  • [2016] Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
  • [2016] Interlaminar and Intralaminar Fracture Behavior of Carbon Fiber Reinforced Polymer Composites
  • [2016] Multiscale virtual testing: the roadmap to efficient design of composites for damage resistance and tolerance
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] Physically-sound simulation of low-velocity impact on fiber reinforced laminates
  • [2016] Preliminary suitability analysis of carrier approach guidance and recovery of land-based aircraft
  • [2016] Strength and toughness of structural fibres for composite material reinforcement
  • [2016] Strength and toughness of structural fibres for composite materials reinforcement
  • [2016] X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear
  • [2015] An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography
  • [2015] Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
  • [2015] Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
  • [2015] Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law
  • [2015] Physically-sound simulation of low-velocity impact on fiber reinforced laminates
  • [2015] Transverse cracking of cross-ply laminates: A computational micromechanics perspective
  • [2014] A level set approach for the analysis of flow and compaction during resin infusion in composite materials
  • [2014] A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites
  • [2014] Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates
  • [2014] INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS
  • [2014] Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
  • [2014] Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
  • [2014] Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
  • [2014] Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials
  • [2013] Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond
  • [2013] Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
  • [2013] X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
  • [2012] A constitutive model for the in-plane mechanical behavior of nonwoven fabrics.
  • [2012] A methodology to measure the interface shear strength by means of the fiber push-in test
  • [2012] Application of digital image correlation at the microscale in fiber-reinforced composites
  • [2012] Damage localization and failure locus under biaxial loading in glass-fiber nonwoven felts
  • [2012] Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography
  • [2012] Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
  • [2012] Failure locus of polypropylene nonwoven fabrics under in-plane biaxial loading
  • [2012] Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression
  • [2012] Intraply fracture of fiber-reinforced composites: microscopic mechanisms and modeling
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test.
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test.
  • [2011] Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites
  • [2011] Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites.
  • [2011] Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics.
  • [2011] Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing
  • [2011] Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing.
  • [2011] Virtual mechanical testing of composites: from materials to components.
  • [2010] An experimental and Numerical Study of the Influence of local Effects on the applications of the fibre push-in test
  • [2010] An experimental and numerical study of the influence of local effects on the application of the fibre push-in tests
  • [2010] Comportamiento en Fractura de un fieltro de fibra de vidrio
  • [2010] Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study
  • [2010] Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates
  • [2010] Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites
  • [2010] Mecanismos de Deformación en laminados de matriz polimérica correlación digital de imágenes y micromecánica computacional
  • [2009] EXTRACTING IN-SITU THE MECHANICAL PROPERTIES OF THE POLIMERIC MATRIX IN COMPOSITES THROUGH IN-SITU NANOINDENTATION TESTS
  • [2009] Failure analysis of impacted hybrid laminate composites using X ray tomography
  • [2009] MECHANICAL BEHAVIOR OF COMPOSITE MATERIALS IN SHEAR: EXPERIMENTS AND SIMULATIONS
  • [2009] Mechanisms of Shear Deformation in Fiber-Reinforced Polymers: Experiments and Simulations
  • [2009] Strength and Toughness of Cellular SiC at Elevated Temperature
  • [2008] Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear
  • [2008] Influence of the Loading Path on the Strength of Fiber-Reinforced Composites Subjected to Transverse Compression and Shear
  • [2008] Prediction of the Failure Locus of C/PEEK Composites under Transverse Compression and Longitudinal Shear Through Computational Micromechanics
  • [2007] Mechanical Behavior of Unidirectional Fiber-Reinforced Polymers under Transverse Compression: Microscopic Mechanisms and Modelling.
  • [2007] Micromechanics of Elasto-plastic Materials Reinforced with Ellipsoidal Inclusions.
  • [2007] Numerical Simulation of the Fracture Behavior of Ti/SiC Composites Between 20ºC and 400ºC
  • [2007] PROPIEDADES MECANICAS Y SENSIBILIDAD A LAS ENTALLAS DE FIELTROS DE FIBRAS
  • [2007] Virtual Fracture Testing of Fiber-reinforced Composites: A Computational Micromechanics Approach
  ...
  mostrar más
• Capítulos de libros
  • [2018] Multiscale FE modelling and design of composite laminates under impact
  • [2017] The Structural Integrity of Carbon Fiber Composites
  • [2016] Microscale Characterization Techniques of Fibre-Reinforced Polymers
  • [2015] Computational micromechanics strategies for the analysis of failure in unidirectional composites
  • [2015] Virtual testing of velocity impact in c/epoxy laminates
  • [2011] Advances and challenges in the computational simulation of composites
  • [2011] Virtual mechanical testing of composites: from materials to components
  • [2011] Virtual mechanical testing of composites: from materials to components.
  • [2007] Finite Element and Homogenization Modelling of Materials
  ...
  mostrar más
• Conferencias invitadas en congresos
  • [2016] Ballistic performance of needlepunched nonwoven fabrics: experiments and modelling
  • [2016] Computational micromechanics of composites: a mature discipline?
  • [2016] Multiscale micromechanical model of needlepunched nonwoven fabrics
  • [2015] Computational micromechanics of composites: a mature discipline?
  • [2015] Multiscale Virtual Testing: The roadmap to the efficient design of composites for structural integrity
  • [2015] Multiscale modelling of impact in composite materials and structures
  • [2013] Multiscale design of nano-engineered structural composites
  • [2012] Fracture of heterogeneous materials: a microstructural perspective
  • [2012] Optimization of the mechanical behavior of composites under impact by means of multiscale modeling
  • [2011] Effect of cure cycle on void distribution and mechanical properties of polymer-matrix composites
  • [2011] MODELIZACIÓN NUMÉRICA DEL COMPORTAMIENTO MECÁNICO DE UN FIELTRO DE POLIPROPILENO
  • [2008] AN ANALYSIS OF FAILURE IN COMPOSITE MATERIALS USING IMAGE-BASED COMPUTATIONAL MICROMECHANICS
  • [2008] Virtual Testing of Composite Laminate Coupons
  • [2007] Mechanical Behavior of Fiber-Reinforced Polymers under Transverse Compression and Shear
  • [2007] Virtual Testing of Composites: from materials to components
  ...
  mostrar más
• Cursos, seminarios y tutoriales
  • [2015] Advanced composite manufacturing seminar
  • [2015] Simulation techniques and virtual testing
  • [2013] Computational and experimental micromechanics of composites. A mature discipline?
  • [2013] Multiscale modelling of composites: a roadmap towards virtual testing
  • [2010] Técnicas de simulación avanzadas de materiales compuestos: Virtual Testing
  ...
  mostrar más
• Libros
  • [2009] Problemas de Materiales Compuestos
• Otros méritos
  • [2016] Secretario Asociación Española de Materiales Compuestos AEMAC
  • [2015] Miembro de la Junta directiva de la Asociación Española de Materiales Compuestos (AEMAC)
  • [2011] International Symposium on Multiscale Modelling of Composites at the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures
  • [2009] Miembro de la Sociedad Española de Integridad Estructural-Grupo Español de Fractura
  ...
  mostrar más
• Patentes
  • [2017] Método de fabricación de materiales compuestos con capacidad de monitorización y material obtenible
  • [2010] Método de diseño de un cable de fibras sintéticas
  • [2010] Procedimiento para mejorar la resistencia a compressión de fibras de PBO, y fibras de PBO obtenidas mediante dicho procedimiento,
• Ponencia en Congresos
  • [2019] A numerical framework to analyze fracture in composite materials: from simulated crack resistance curves to homogenized softening laws
  • [2019] Estudio de la generación y evolución de daño en laminados de fibra de carbono sujetos a ciclado térmico y agentes corrosivos
  • [2019] Estudio de velocidad de resina y poros en procesos de moldeo por ruta liíquida mediante tomografiía rápida de rayos X
  • [2019] Estudio de velocidad de resina y poros en procesos de moldeo por ruta líquida mediante tomografía rápida de rayos X
  • [2019] High rate translaminar fracture toughness characterization in carbon fiber reinforced composite
  • [2019] Micromechanical modeling of composite ply incorporating a strain rate dependent constitutive model informed by a novel micromechanical testing technique
  • [2019] Multiscale modelling of composites: Towards virtual testing
  • [2018] Ballistic Performance of Nonwoven Fabrics for Lightweight Armours
  • [2018] Effect of temperature and moisture on the high speed impact performance of glass/carbon hybrid composites
  • [2017] Ballistic Performance of needle-punched nonwoven fabrics: experiments and simulations
  • [2017] Numerical modeling of the ballistic behavior of a needlepunched nonwoven
  • [2016] A micromechanical evaluation of the effect of fiber shape in carbon fiber composites
  • [2016] A versatile multiscale framework for the mechanical simulation of nonwovens
  • [2016] Computational micromechanics on polymer matrix composites under different environments: longitudinal, transverse and shear ply properties
  • [2016] Dual scale vacuum infiltration of fiber-reinforced composites: from in situ synchrotron experiments to numerical simulations
  • [2016] Experimental characterization of triaxial braided composites
  • [2016] Implementation of periodic boundary conditions through a penalty method
  • [2016] Interlaminar and Intralaminar Fracture Behavior of Carbon Fiber Reinforced Polymer Composites
  • [2016] Intralaminar fracture toughness characterization through computational micromechanics
  • [2016] Mechanisms of air removal and void development in out-of-autoclave processing of hand lay-up laminates
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2015] A Computational Micromechanics approach for ply properties optimization
  • [2015] A level set method for vacuum infusion of composite materials
  • [2015] A model for the generation of the geometrical meso-structure of a triaxially braided
  • [2015] An Advanced Meso-scale Finite Element Model for Textile Composites
  • [2015] Computational micromechanics applied to polymer matrix composites: experiments and simulations
  • [2015] Computational micromechanics applied to polymer matrix composites: fiber-dependent properties
  • [2015] Deformation mechanisms and microstructure evolution of needlepunched nonwoven fabrics
  • [2015] Development of semicured composite parts for highly integrated manufacturing process
  • [2015] Efecto de sensibilidad inversa a entalla en un nonwoven de polipropileno
  • [2015] Experimental Determination of the Mode II Cohesive Law of UD Hybrid Composite Interfaces using Full Displacement Fields
  • [2015] Experimental determination of the mode II cohesive law of UD hybrid composite interfaces using full displacement fields
  • [2015] Inverse notch sensitivity in a thermally bonded nonwoven
  • [2015] Meso-Scale Analysis of Triaxial Braided Composite Material Properties
  • [2015] Multiscale Modelling of Composites for the Physically-Sound Simulation of Low-Velocity Impact on Laminated
  • [2015] Multiscale dual phase flow in vacuum infusion
  • [2015] UD ply property prediction using computational micromechanics: experiments and simulations
  • [2014] A stable X-FEM in cohesive transition from closed to open crack
  • [2014] Analysis of transverse cracking in unidirectional composite plies by means of computational micromechanics
  • [2014] Combined multiscale simulations in fiber-reinforced composites
  • [2014] Insensibilidad extrema a entalla en la fractura de un fieltro de polipropileno
  • [2014] Mechanical behaviour of hybrid 3D woven composites under static and impact loads
  • [2014] Modelization of advanced nonwoven fabrics subjected to tensile loads
  • [2014] On the use of DIC-3D to determine the poermability tensor and compaction law of fabric by VARTM
  • [2014] Thermo-mechanical damage due to lightning impact in carbon/epoxy composites: experiments and simulations
  • [2014] X-Ray computed tomography analysis of deformation and damage mechanisms of fiber-reinfoced composites in shear
  • [2013] Damage mechanisms of 3D woven hybrid composites loaded in tension: testing, inspection and simulation
  • [2013] Hierarchical mechanisms of energy dissipation at the nm and µm scale during fracture of advanced fiber-reinforced composites
  • [2013] High-velocity impact of 3D woven composites: ballistic curve and failure mechanisms
  • [2013] On the use of in situ SEM testing and simulation to study deformation and failure mechanisms in composite materials
  • [2013] X-ray tomographic investigation of damage evolution of sequential tensile deformation of ±45º plain and open hole carbon fibre laminates
  • [2013] X-ray tomography assessment of shear damage in carbon fiber laminates
  • [2012] A constitutive model for the tensile behavior of nonwovens
  • [2012] A novel methodology to determine the mechanical properties of amorphous materials through instrumented nanoindentation
  • [2012] Analysis of curing cycle efect on processing voids distribujtion and mechanical properties of a polymer composite material
  • [2012] Detailed damage mechanisms assessment in composite materials by means of X-ray tomography
  • [2012] Determination of the mechanical properties of amorphous materials through instrumented indentation
  • [2012] Mechanical charaterisation of 3D woven materials against impact loads
  • [2012] Micromechanical modeling of the effect of hot-wet conditions on the mechanical behavior of composite materials
  • [2012] Micromechanical study of the failure of fiber-reinforced polymers
  • [2012] Modelling of the low-velocity impact behaviour of 3D orthogonal hybrid woven composites
  • [2011] Characterization of the fiber/matrix interfacial adhesion in fibre reinforced composites by the push-in test
  • [2011] Damage and defects assessment in composite materials using X-ray computed tomography
  • [2011] Damage inspection in 3D orthogonal woven composites and plain weave fabrics subjected to both static and impact loads. Testing and simulation
  • [2011] Deformation and damage mechanisms in composite materials by in situ SEM testing
  • [2011] Deformation and fracture micro-mechanisms through in situ SEM testing and digital image correlation
  • [2011] Effect of cure cycle on void distribution and mechanical properties of polymer-matrix composites
  • [2011] Experimental assessment of processing defects on the mechanical properties of a composite material by X-ray tomography
  • [2011] Matrix cracking and crack deflection in unidirectional fiber reinforced composite laminates
  • [2011] Matrix cracking and crack deflection in unidirectional fiber reinforced composite laminates
  • [2011] Mechanical testing and simulation of 3D orthogonal interlocked fabric composites
  • [2011] Sequential stages of crack propagation in pre-notched glass fiber/epoxy cross-ply composites studied by XCT
  • [2011] Simulation of damage in composite laminates using X-FEM including experimental validation with X-ray tomography
  • [2011] Virtual mechanical testing of composites: from materials to components
  • [2010] Computational modeling of deformation and fracture of nonwoven felts
  • [2010] Effect of glass fiber hybridization on the impact resistance of woven carbon fiber/epoxy laminates
  • [2010] Micromechanics of Polypropilene nonwoven felts: Experimental characterization and nuemrical modelling
  • [2010] Modelling the interaction between matrix cracking and delamination in angle ply laminates. XFEM analysis of the interaction between ply failure by splitting and delamination
  • [2008] Failure Criteria for Composite Materials under Multiaxial Stress States
  • [2007] Modelling Low Velocity Impact in C/epoxy Laminates
  • [2007] PROPIEDADES MECANICAS Y SENSIBILIDAD A LAS ENTALLAS DE FIELTROS DE FIBRAS
  • [2007] VIRTUAL TESTING OF C/EPOXY LAMINATES UNDER LOW VELOCITY IMPACT
  ...
  mostrar más
• Premios
  • [2015] Premio UPM Innovación Educativa al grupo "GIE Grado de Ingeniería de Materiales"
• Proyectos de I+D+i
  • [2019] MAT4.0-CM: FABRICACION INTELIGENTE DE MATERIALES AVANZADOS PARA EL TRANSPORTE, LA ENERGIA Y LA SALUD (UPM-MMEAN)
  • [2016] COMPUESTOS MULTIFUNCIONALES Y TOLERANTES AL DAÑO:INTEGRACIÓN DE NANOREFUERZOS DE CARBONO AVANZADOS Y LAMINADOS NO-CONVENCIONALES
  • [2015] MuDaTCom: Compuestos multifuncionales y tolerantes al daño. Integración de nano-refuerzos de carbono avanzados y laminados no convencionales
  • [2014] COMPUESTOS MULTIFUNCIONALES Y TOLERANTES AL DAÑO:INTEGRACIÓN DE NANOREFUERZOS DE CARBONO AVANZADOS Y LAMINADOS NO-CONVENCIONALES
  • [2014] ESTUDIOS AVANZADOS EN MATERIALES
  • [2013] COMPUESTOS MULTIFUNCIONALES Y TOLERANTES AL DAÑO:INTEGRACIÓN DE NANOREFUERZOS DE CARBONO AVANZADOS Y LAMINADOS NO-CONVENCIONALES
  • [2013] Estudios Avanzados en Materiales
  • [2011] Estudios Avanzados en Materiales
  • [2009] ACCION INTEGRADA HISPANO ITALIANA
  • [2009] DESARROLLO DE NUEVOS CRITERIOS DE ROTURA PARA MATERIALES COMPUESTOS
  • [2009] EFECTOS DEL TAMAÑO EN EL COMPORTAMIENTO MECANICO DE MONOCRISTALES. EXPERIMENTOS Y SIMULACIONES. SUBPROYECTO I
  • [2009] ENSAYOS DE CUALIFICACION PARA BAJA TEMPERATURA DE ACERO EN BARRAS CORRUGADAS INCLUYENDO INFORME Y SUS CONCLUSIONES SEGÚN DOCUMENTO.
  • [2009] EQUIPO DESEGURIDAD Y DURABILIDAD DE ESTRUCTURAS DE CONSTRUCCION ( PROGRAMA CONSOLIDER INGENIO 2010)
  • [2009] GRUPO DE INVESTIGACION: MATERIALES ESTRUCTURALES AVANZADOS Y NANOMATERIALES.
  • [2009] MATERIALES ESTRUCTURALES AVANZADOS
  • [2009] TRABAJO DE INVESTIGACIÓN SOBRE LA APLICABILIDAD DE LOS MATERIALES COMPUESTOS EN LA CONSTRUCCIÓN CIVIL
  • [2009] TRABAJOS DE INVESTIGACIÓN EN EL AMRCO DE DESARROLLO DEL PROYECTO CIENTÍFICO-TECNOLÓGICO SINGULAR Y DE CARÁCTER ESTRATÉGICO PROMETEO DENTRO DEL PROGRAMA CENIT 200
  • [2009] TRABAJOS DE INVESTIGACIÓN EN EL MARCO DE DESARROLLO DEL PROYECTO CIENTÍFICO-TECNOLÓGICO SINGULAR Y DE CARÁCTER ESTRRATÉGICO PROMETO DENTRO DEL PROGRAMA CENIT 200
  • [2008] Desarrollo de actividades de investigación en el proyecto PROMETEO-Desarrollo de nuevo conocimiento y tecnología inteligente en materiales orgánicos y cerámicos, orientado a la mejora de la productividad y la creación de negocio en el ámbito de una edificación más sostenible
  • [2008] Desarrollo de nuevos criterios de rotura para materiales compuestos mediante técnicas de micromecánica computacional. DNCRMCTMC.
  • [2008] ENSAYOS DE CUALIFICACION PARA BAJA TEMPERATURA DE ACERO EN BARRAS CORRUGADAS INCLUYENDO INFORME Y SUS CONCLUSIONES SEGÚN DOCUMENTO.
  • [2008] Equipo de seguridad y durabilidad de estructuras de construcción. SEDUREC
  • [2008] Trabajo de Investigación sobre la Aplicabilidad de los materiales compuestos en la Ingeniería Civil
  • [2007] Desarrollo de actividades de investigación en el proyecto PROMETEO-Desarrollo de nuevo conocimiento y tecnología inteligente en materiales orgánicos y cerámicos, orientado a la mejora de la productividad y la creación de negocio en el ámbito de una edificación más sostenible
  • [2007] Desarrollo de actividades de investigación en el proyecto PROMETEO-Desarrollo de nuevo conocimiento y tecnología inteligente en materiales orgánicos y cerámicos, orientado a la mejora de la productividad y la creación de negocio en el ámbito de una edificación más sostenible
  • [2007] Desarrollo de nuevos criterios de rotura para materiales compuestos mediante técnicas de micromecánica computacional
  • [2007] Equipo de seguridad y durabilidad de estructuras de construcción. CONSOLIDER INGENIO-2010. Ref: CSD00C-06-14102.
  • [2007] Materiales Estructurales Avanzados. ESTRUMAT
  • [2007] Trabajo de Investigación sobre la Aplicabilidad de los materiales compuestos en la Ingeniería Civil
  ...
  mostrar más
• Registros de Software
  • [2017] Virtual Ply Properties Prediction: Viper
  • [2017] Virtual Ply Properties Prediction: Viper
• Responsabilidades
  • [2011] International Symposium on Multiscale Modelling of Composites at the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures
• Tesis Doctorales
  • [2019] A study of the factors influencing air removal in Out-of-Autoclave processing of composites
  • [2017] Prediction of mechanical properties of unidirectional FRP plies at different environmental conditions by means of computational micromechanics
  • [2016] Multiscale analysis of the mechanical behavior of needle-punched nonwoven fabrics
  • [2014] High Fidelity Simulations of Failure in Fiber Reinforced Composites
  • [2013] Curing, Defect and Mechanical Performance of Fiber-Reinforced Composites
  • [2011] Experimental and Computational Micromechanical Study of Fiber-Reinforced Polymers
  • [2011] MECHANICAL BEHAVIOR OF NONWOVEN FELTS
  ...
  mostrar más