Portal de Transparencia

Actividad investigadora:

• Artículos en revistas
  • [2019] 3-D-Printed Modified Butler Matrix Based on Gap Waveguide at W-Band for Monopulse Radar
  • [2019] A Miniaturized Ultrawideband Archimedean Spiral Antenna for Low-Power Sensor Applications in Energy Harvesting
  • [2019] A miniaturized ultrawideband Archimedean spiral antenna for low-power sensor applications in energy harvesting
  • [2019] Design of a Perforated Flat Luneburg Lens Antenna Array for Wideband Millimeter-Wave Applications
  • [2019] Gain-Reconfigurable Hybrid Metal-Graphene Printed Yagi Antenna for Energy Harvesting Applications
  • [2019] Intertwined inductive frequency selective surface: An application for satellite communications
  • [2019] One-Plane Glide-Symmetric Structures Over Dielectric Substrate
  • [2019] Parasitics Impact on the Performance of Rectifier Circuits in Sensing RF Energy Harvesting
  • [2019] Space Reduction Between Parallel Gap Waveguides Using Stacked Glide-Symmetric Metal Sheets
  • [2018] An Embedded Printed Antenna with Omnidirectional Azimuth Coverage for Automotive Applications
  • [2018] An Embedded Printed Antenna with Omnidirectional Azimuth Coverage for Automotive Applications
  • [2018] Comparison Between a Multiband PIFA and a Ultrawideband Archimedean Spiral Antenna for Energy Harvesting in Microwave Bands
  • [2018] Development of aperture-coupled patch array antennas at 60 GHz for 5G applications
  • [2018] Low Cost Millimeter-Wave Antenna with Simultaneous Sum and Difference Patterns for 5G Point-to-Point Communications
  • [2018] Low-loss Loaded Line Phase Shifter for Radar Application in X band
  • [2018] Millimeter-Wave Components Based on Gap Waveguide Using Additive Manufacturing
  • [2017] An Embedded Lightweight Folded Printed Quadrifilar Helix Antenna UAV telemetry and remote control systems
  • [2017] An Embedded Lightweight Folded Printed Quadrifilar Helix Antenna: UAV Telemetry and Remote Control Systems
  • [2017] Broadband Electronically Tunable Reflection-Based Phase Shifter For Active-Steering Microwave Reflectarray Systems in Ku-Band: Prototype Validation
  • [2017] Circularly-Polarized Broadband Planar Lightweight Reflectarray with Eligible Radiating Pattern For Satellite Communications in Ku-Band
  • [2017] Groove Gap Waveguide in 3-D Printed Technology for Low Loss, Weight, and Cost Distribution Networks
  • [2017] Groove Gap Waveguide in 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks
  • [2017] Groove Gap Waveguide in metallized 3D-printed plastic and in mechanized aluminium in Ka band
  • [2017] Low Losses Printed Distribution Network Technologies for Planar Antennas in Ka Band
  • [2017] Planar Antenna Array on LTCC and Rogers substrates for 5G applications
  • [2016] Broadband Electronically Tunable Reflection-Based Phase Shifter for Active-Steering Microwave Reflectarray Systems in Ku-Band
  • [2016] Broadband planar multilayered reflectarray based on circular stacked patches and reflective printed circuits for microwave communication systems
  • [2016] Circularly-polarized broadband planar lightweight reflectarray with eligible pattern for satellite communications in Ku-Band
  • [2016] Design Rules for Antenna Placement on MIMO Systems
  • [2016] Design proposal for Ridge Gap Waveguide and comparison with other technologies in Ka to W bands
  • [2016] Electronically Reconfigurable Phase Shifter for Reflectarray Applications at Microwave Bands
  • [2016] Ka band active array antenna for mobile satellite communications
  • [2016] Study of materials and manufacturing technologies for an antenna distribution network in Ka band
  • [2016] X Band Phased Array Design for Radar Application
  • [2014] High-frequency radiating element and modified 3 dB/90 degrees electronic shifting circuit with circular polarisation for broadband reflectarray device cells
  • [2013] Design and Implementation of a Quasi-Orthogonal Switching Beam-Former for Triangular Arrays of Three Radiating Elements
  • [2013] Design and Implementation of a Quasi-Orthogonal Switching Beam-Former for Triangular Arrays of Three Radiating Elements
  • [2013] GEODA-SARAS: Multi-Phased Array Planar Antenna for Satellite Communications
  • [2013] LOW LOSS POWER DISTRIBUTION NETWORK IN STRIPLINE TECHNOLOGY FOR PLANAR ARRAY ANTENNAS
  • [2012] Low-Profile Dual Circularly Polarized Antenna Array for Satellite Communications in the X Band
  • [2011] ELECTROMAGNETIC ANALYSIS OF PLANAR ARRAY STRUCTURES WITH MPIE-MoM METHOD AND NEIGHBORHOOD MUTUAL COUPLING
  • [2011] MULTILAYERED PATCHES WITH TUNABLE PHASE RESPONSE FOR PHASED ARRAYS AT MICROWAVE FREQUENCIES
  • [2010] Electronically tunable phase response for phased array patches
  • [2010] Electronically tunable phase response for phased array patches
  • [2009] Hard Surfaces to Reduce Blockage in Thick Cylinders
  • [2009] Ideally Hard Struts to Achieve Invisibility
  • [2009] STACKED CIRCULAR PATCH ANTENNA WITH DUAL RIGHT/LEFT HAND CIRCULAR POLARIZATION FOR WIDEBAND APPLICATIONS IN X BAND.
  • [2008] Characterization of Artificial Magnetic Conductor Strips for Parallel Plate Planar Antennas
  ...
  mostrar más
• Capítulos de libros
  • [2019] Chapter: New One-Plane Glide Symmetric Holey Structures for Stop-Band and Refraction Index Reconfiguration
  • [2011] New Antenna Array Architectures for Satellite Communications
• Conferencias invitadas en congresos
  • [2018] Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
  • [2018] Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
• Cursos, seminarios y tutoriales
  • [2018] Ponente invitado: Metal-Coated 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks in Antennas at Millimeter Wave Bands
  • [2013] Athens course "Antenna design and measurement techniques"
  • [2009] Athens 2009
• Estancias y sabáticos recogidos en programas oficiales
  • [2018] Design, Analysis, Prototyping and Measurement of Reconfigurable Active Antennas in Millimeter Bands
• Otros méritos
  • [2019] Evaluador de Proyectos I+D+i en CÁMARA CERTIFICA (Entidad de Certificación de Proyectos I+D+i).
  • [2019] Evaluador de Proyectos I+D+i en certificación de carácter científico-tecnológico de la Agencia de Certificación en Innovación Española (www.acie.es) (Méritos a la hora de presentar solicitud en la Comisión Nacional Evaluadora de la Actividad Ingestigadora (CNEAI) para la evaluación de la actividad investigadora de los profesores universitarios).
  • [2019] Presidente de sesión (Chair) EuCAP 2019 session W_A04 MM Submm THz: "W_A02 Millimeter, SubMillimeter and Terahertz Antennas" in 13th European Conference on Antennas and Propagation, Krakow, Poland, 2019.
  • [2018] Miembro de la Comisión Académica del programa del Master of Science in Signal Theory and Communications.
  ...
  mostrar más
• Patentes
  • [2009] Antena Plana de Parches Compacta y Modular para Transmisión y Recepción en Banda Ku y con Polarización Circular a Derechas e Izquierdas Seleccionable.
  • [2009] Antena Plana de Ranuras para Transmisión y Recepción en Banda X y Método de cambio de Polarización de la misma.
  • [2009] Antena Plana en Array para Transmisión y Recepción en Banda X con Polarización Circular Seleccionable.
  • [2009] Dispositivo Desfasador Reconfigurable de Radiofrecuencia para Banda Ku
  • [2008] Dispositivo desfasador reconfigurable de rafiofrecuencia para banda Ku
  ...
  mostrar más
• Ponencia en Congresos
  • [2019] Beam Steering using Active Artificial Magnetic Conductors: A 10-Degree Step Controlled Steering
  • [2019] Design of a Perforated Flat Luneburg Lens Antenna Array for Wideband Millimeter-Wave Applications
  • [2019] Docencia de Antenas Basadas en Proyectos
  • [2019] Electrically Tunable Phase Shifter Based on Liquid Crystal and 3D-Printed Gap Waveguide at W band
  • [2019] Floquet Analysis of Glide-Symmetric Metasurfaces with Elliptic Holes
  • [2019] Gain-Reconfigurability Hybrid Metal-Graphene Printed Yagi Antenna for Energy Harvesting Applications
  • [2019] Interwined Inductive Frequency Selective Surface: Na Application for Satellite Communications
  • [2019] One Plane Glide-Symmetric Structures over Dielectric Substrate
  • [2019] Space Reduction Between Parallel Gap Waveguide using Stacked Glide-Symmetric Metal Sheets
  • [2018] A Planar Array Slot Antenna Fed by Top-to-Bottom-Contactless Waveguides
  • [2018] Additive Manufacturing and Liquid Crystals for New Millimeter-Wave Devices
  • [2018] An Electrical-Contactless Substrate-Over-Waveguide Planar Array Slot Antenna
  • [2018] Comparison Between a Multiband PIFA and a Ultrawideband Archimedean Spiral Antenna for Energy Harvesting in Microwave Band
  • [2018] Development of Aperture-Coupled Patch Array Antennas at 60 GHz for 5G Applications
  • [2018] Glide-Symmetric Holey Metallic Structures for Cost-Effective Implementations of Gap Waveguide Technology
  • [2018] Glide-Symmetric Holey Structure with Selected Bandgaps for Gap-Waveguide Technology
  • [2018] Low-Loss Loaded Line Phase Shifter for Radar Application in X band
  • [2018] Low-loss Loaded Line Phase Shifter for Radar Application in X band
  • [2018] Millimeter-Wave Components Based on Gap Waveguide Using Additive Manufacturing
  • [2018] Monopulse RLSA Antenna Based on A Gap Waveguide Butler Matrix with a Feeding Cavity at 94 GHz
  • [2018] Monopulse RLSA Antenna with Gap-Waveguide Feeding Network for Space Debris Radar at 94 GHz
  • [2018] Monopulse Space Debris Radar Antenna based on RLSA and 3D-Printed Gap Waveguide at 94 GHz
  • [2018] New Manufacturing Technologies for 5G Millimeter Wave Antennas
  • [2018] New Radiofrequency Technologies for 5G Systems
  • [2018] Outline of a Radiofrequency Energy Harvesting System Based on an Ultrawideband Archimedean Spiral Antenna
  • [2018] Quad Band Inductive Frequency Selective Surface: An application for Satellite Communications
  • [2017] Circular Array Antenna for UAV-UAV
  • [2017] Circular array antenna tor UAV-UAV communications
  • [2017] Comparison of 60 GHz Planar Array Antenna on LTCC and Rogers Substratesfor 5G applications
  • [2017] Desfasadores de Bajas Pérdidas en Línea de Transmisión Cargadas
  • [2017] Groove Gap Waveguide in Metallized 3D-Printed Plastic and in Mechanized Aluminium in Ka Band
  • [2017] Low Losses Printed Distribution Network
  • [2017] Low Losses Printed Distribution Network Technologies for Planar Antennas in Ka Band
  • [2017] Phase-Control-Integrated LTCC-Printed Radiating Elements for Mobile Satellite Communications
  • [2017] Planar Antenna Array on LTCC and Rogers substrates for 5G applications
  • [2016] Design Proposal for Ridge Waveguide and Comparison with Other Technologies in Ka to W Bands
  • [2016] Electronically Reconfigurable Phase Shifter For Reflectarray Applications at Microwave Bands
  • [2016] Ka Band Active Array Antenna For Mobile Satellite Communications
  • [2016] New Antenna Topologies For 5G Communication Systems
  • [2016] Over-the-Horizon Communications Systems For Uavs Based on Intelligent Antennas.
  • [2016] Study of Materials and Manufacturing Technologies for an Antenna Distribution Network in Ka Band
  • [2016] Subarray activo para antenas de comunicaciones por satélite en banda Ka
  • [2016] Substrate Integrated Waveguide and Gap
  • [2016] X Band Phased Array Design For Radar Application
  • [2015] Antenas en Array Activas para Comunicaciones y Sistemas de Localización
  • [2015] Planar Multilayered Printed Reflectarrays for Satellite Communications in Ku-Band
  • [2014] GEODA-SARAS: Multi-Phased Array Planar Antenna Design and Measurements
  • [2014] GEODA-SARAS: Multi-Phased Array Planar Antenna. Cell Module Measurements
  • [2013] Radiating Element of GEODA-SARAS
  • [2013] Radiating element of GEODA-SARAS
  • [2012] New EBG solutions for mutual coupling reduction
  • [2012] Revision of EBG metamaterials and active antennas
  • [2011] Electronic Steering antenna onboard for satellite communications in X band.
  • [2011] Matriz de Butler de banda ancha en banda X para antenas de haz reconfigurable.
  • [2011] Mutual coupling reduction techniques in electronic steering antennas in X band
  • [2009] "Application of Metamaterial Structures in Antennas"
  • [2009] "Parallel-Plate Slot Antenna with a Planar Left-Handed Lens for TEM Plane Wave Excitation at 7.5 GHz"
  • [2008] Caracterización de una lente zurda plana para la excitación de antenas planas de ranuras
  • [2008] Comparisons of Blockage Widths of Ideally Hard Cylinders of Different Cross-Sectional Shapes
  ...
  mostrar más
• Premios
  • [2019] Accésit Premio Jóvenes Investigadores URSI 2019 como co-autor del artículo "Electrically Tunable Phase Shifter Based on Liquid Crystal and 3D-Printed Gap Waveguide at W band".
  • [2018] Accésit Premio Jóvenes Científicos URSI 2018 como co-autor del artículo: Outline of a Radiofrequency Energy Harvesting System based on an Ultrawideband Archimedean Spiral Antenna
  • [2018] Premio Jóvenes Científicos URSI 2018 como co-autor del artículo: Monopulse Space Debris Radar Antenna based on RLSA and 3DPrinted Gap Waveguide at 94 GHz
• Proyectos de I+D+i
  • [2019] Asesoría Técnica para la definición de la arquitectura global y de los elementos radiantes de antena IFF con apuntamiento electrónico
  • [2019] Feed Array Development for MEO Tracking Antennas
  • [2018] GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
  • [2018] MULTI.FUNCIONAL ANTENNAS FOR FUTURE NAVIGATION PAYLOADS
  • [2018] REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
  • [2017] Diseño de Antena DEMAC
  • [2017] Diseño de Antena DEMAC
  • [2017] Evaluación de diseños para antena radar
  • [2017] GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
  • [2017] GR. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
  • [2017] LAB 33. SPACE DEBRIS RADAR-RADAR PARA DETECCIÓN DE BASURA ESPACIAL.
  • [2017] MULTI.FUNCIONAL ANTENNAS FOR FUTURE NAVIGATION PAYLOADS
  • [2017] REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
  • [2016] Asesoría Tecnológica para el Diseño de antena para un sistema 4G LTE
  • [2016] REALIZACIÓN DE UN SISTEMA DE COMUNICACIONES AIRE-AIRE CON ANTENAS INTELIGENTES PARA ENLACES DE DATOS EN UAV¿S
  • [2016] REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
  • [2016] SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM)
  • [2015] Anexo 3: Asesoría, desarrollo de similaciones electromagnéticas con el software comercial CST Studio Suite y medida de un prototipo de una junta rotatoria en banda K
  • [2015] Asesoría Tecnológica para el Diseño de antena para un sistema 4G LTE
  • [2015] JETSTREAM: Desarrollo de una antena banda KA embarcada para la prestación de servicios de acceso a internet por satélite en aviación comercial
  • [2015] Prototipo de una unidad de monitorización y clasificación de señales de radio
  • [2015] REALIZACIÓN DEL DESARROLLO DE UNA EQUIPO SERIALIZADO PARA COMUNICACIONES VÍA RADIO
  • [2015] SARAS: SISTEMA RÁPIDO DE ADQUISICIÓN DE SATELITES
  • [2015] SICOMORO: Sistemas de comunicaciones para situaciones de emergencia
  • [2015] SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM)
  • [2015] SPACE DEBRIS RADAR- RADAR PARA DETECCIÓN DE BASURA ESPACIAL ( SPADERADARCM) LABORATORIO
  • [2014] Antenas activas para sistemas radar de vigilancia
  • [2014] Diseño de un demostrador de antenas activas para sistemas radar de vigilancia
  • [2014] SARAS: SISTEMA RÁPIDO DE ADQUISICIÓN DE SATELITES
  • [2014] SISTEMAS DE COMUNICACIONES PARA SITUACIONES DE EMERGENCIA
  • [2010] Diseño de Antena de Ranuras con Haz Sectorial en Banda X
  • [2010] Optimización de antenas de banda X (Haz pincel y sectorial)
  • [2009] Diseño de Antena de Ranuras con Haz Sectorial en Banda X
  • [2009] Optimización de antenas de banda X (Haz pincel y sectorial)
  • [2008] DISEÑO DE ANTENA DE RANURAS CON HAZ SECTORIAL EN BANDA X.
  ...
  mostrar más
• Tesis Doctorales
  • [2014] Contribution to active multi-beam reconfigurable antennas for L and S bands
  • [2013] Contribution to active array antennas at microwave bands - Contribución a los arrays de antenas activos en microondas.
  • [2009] Application of Metamaterial Structures in The Design, Analysis and Prototyping of Planar Antennas (En español: Aplicación de Estructuras Metamateriales en el Diseño, Análisis y Prototipado de Antenas Planas)