Portal de Transparencia

Actividad investigadora:

• Artículos en revistas
  • [2019] Alloy design for mechanical properties: Conquering the length scales
  • [2019] An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al
  • [2019] Effect of grain orientation and local strains on void growth and coalescence in titanium
  • [2019] Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys
  • [2019] Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys
  • [2019] Grain boundary strengthening of FCC polycrystals
  • [2019] High-throughput extraction of the anisotropic interdiffusion coefficients in hcp Mg-Al alloys
  • [2019] Mechanical Behavior of InP Twinning Superlattice Nanowires
  • [2019] Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
  • [2019] Precipitation during high temperature aging of Al-Cu alloys: A multiscale analysis based on first principles calculations
  • [2019] Special-purpose elements to impose Periodic Boundary Conditions for multiscale computational homogenization of composite materials with the explicit Finite Element Method
  • [2019] Strengthening of Al-Cu alloys by Guinier-Preston zones: Predictions from atomistic simulations
  • [2019] Strengthening of Al-Cu alloys by Guinier-Preston zones: Predictions from atomistic simulations
  • [2018] A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. ) alloy
  • [2018] An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
  • [2018] Computational Homogenization of Polycrystals
  • [2018] Computational homogenization of polycrystals
  • [2018] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016)
  • [2018] Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
  • [2018] Discrete dislocation dynamics simulations of dislocation-theta ' precipitate interaction in Al-Cu alloys
  • [2018] Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study
  • [2018] Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers
  • [2018] Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
  • [2018] Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature
  • [2018] Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
  • [2018] Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization
  • [2018] On the quest for the strongest materials
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] Special-purpose elements to impose Periodic Boundary Conditions for computational homogenization with the explicit Finite Element Method
  • [2018] Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams
  • [2018] Tensile deformation and fracture mechanisms of Cu/Nb nanolaminates studied by in situ TEM mechanical tests
  • [2018] The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
  • [2017] Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness
  • [2017] Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium
  • [2017] Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
  • [2017] Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
  • [2017] Multiscale modelling of the morphology and spatial distribution of theta' precipitates in Al-Cu alloys
  • [2017] Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg
  • [2017] Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
  • [2017] Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
  • [2017] Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers
  • [2017] Structural composites for multifunctional applications: Current challenges and future trends
  • [2016] A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K
  • [2016] A new super-efficiently flame retardant bioplastic-poly (lactic acid): flammability, thermal decomposition behavior and tensile properties
  • [2016] Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites
  • [2016] CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain
  • [2016] Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
  • [2016] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
  • [2016] Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
  • [2016] Computational study of atomic mobility in hcp Mg-Al-Zn ternary alloys
  • [2016] Consistent Description of Martensitic Transformation in Polycrystals by Lagrange-Rayleigh Dynamics
  • [2016] Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature
  • [2016] Dual scale vacuum infiltration of fiber- reinforced composites: from in situ synchrotron experiments to numerical simulations
  • [2016] Effect of N,N '-diallyl-phenylphosphoricdiamide on ease of ignition, thermal decomposition behavior and mechanical properties of poly (lactic acid)
  • [2016] Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip
  • [2016] Impact of halogen-free flame retardant with varied phosphorus chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties
  • [2016] Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
  • [2016] Landau Modeling of Dynamical Nucleation of Martensite at Grain Boundaries under Local Stress
  • [2016] Landau modeling of dynamical nucleation of martensite at grain boundaries under local stress
  • [2016] Multiscale virtual testing: the roadmap to efficient design of composites for damage resistance and tolerance
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] Orientation dependence of indentation behavior in Al-SiC nanolaminate composites
  • [2016] Physically-sound simulation of low-velocity impact on fiber reinforced laminates
  • [2016] Preface: special issue on computational micromechanics of materials
  • [2016] Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium
  • [2016] Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium
  • [2016] X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear
  • [2015] An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography
  • [2015] Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
  • [2015] In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates
  • [2015] Macroscopic CNT fibers inducing non-epitaxial nucleation and orientation of semicrystalline polymers.
  • [2015] Macroscopic CNT fibers inducing non-epitaxial nucleation and orientation of semicrystalline polymers.
  • [2015] Macroscopic CNT fibers inducing non-epitaxial nucleation and orientation of semicrystalline polymers.
  • [2015] Macroscopic CNT fibres inducing non-epitaxial nucleation and orientation of semicrystalline polymers
  • [2015] Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
  • [2015] Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization
  • [2015] Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law
  • [2015] On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals
  • [2015] Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature
  • [2015] Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature
  • [2015] Physically-sound simulation of low-velocity impact on fiber reinforced laminates
  • [2015] Three-dimensional dislocation dynamics analysis of size effects on void growth
  • [2015] Transverse cracking of cross-ply laminates: A computational micromechanics perspective
  • [2014] A level set approach for the analysis of flow and compaction during resin infusion in composite materials
  • [2014] A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy
  • [2014] Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at)-0.8 volTiB2 alloy by high temperature in situ mechanical testing
  • [2014] Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates
  • [2014] Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates
  • [2014] Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys
  • [2014] Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys
  • [2014] Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
  • [2014] Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
  • [2014] Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
  • [2014] Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
  • [2014] Investment casting of nozzle guide vanes from Ni-based superalloys: Part I - Thermal calibration and porosity prediction
  • [2014] Investment casting of nozzle guide vanes from Ni-based superalloys: Part II ? Grain structure prediction
  • [2014] Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation
  • [2014] Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
  • [2014] Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
  • [2014] Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
  • [2014] Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method
  • [2014] Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature
  • [2014] Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials
  • [2014] Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword
  • [2014] Understanding size effects on the strength of single crystals through high temperature micropillar compression
  • [2013] Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study
  • [2013] High temperature micropillar compression of Al/SiC nanolaminates
  • [2013] In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt)
  • [2013] In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt)
  • [2013] Latent hardening size effect in small-scale plasticity
  • [2013] Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation
  • [2013] Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation
  • [2013] Molecular dynamics modeling and simulation of void growth in two dimensions
  • [2013] Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond
  • [2013] On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31
  • [2013] Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
  • [2013] Optimum high temperature strength of two-dimensional nanocomposites
  • [2013] Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization
  • [2013] Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics
  • [2013] Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics
  • [2013] X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
  • [2012] A constitutive model for the in-plane mechanical behavior of nonwoven fabrics.
  • [2012] A methodology to measure the interface shear strength by means of the fiber push-in test
  • [2012] Application of digital image correlation at the microscale in fiber-reinforced composites
  • [2012] Damage localization and failure locus under biaxial loading in glass-fiber nonwoven felts
  • [2012] Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography
  • [2012] Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
  • [2012] Effect of misorientation on the compression of highly anisotropic single-crystal micropillars
  • [2012] Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy
  • [2012] Failure locus of polypropylene nonwoven fabrics under in-plane biaxial loading
  • [2012] High temperature nanoindentation behavior of Al/SiC multilayers
  • [2012] In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2
  • [2012] In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31
  • [2012] Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression
  • [2012] Intraply fracture of fiber-reinforced composites: microscopic mechanisms and modeling
  • [2012] Micropillar compression of LiF [111] single crystals: effect of size, ion irradiation and misorientation
  • [2012] Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements
  • [2012] On the Extremal Properties of Hashin's Hollow Cylinder Assemblage in Nonlinear Elasticity
  • [2012] Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites
  • [2011] Advances and challenges in the computational simulation of composites.
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test.
  • [2011] An experimental and numerical study of the influence of local effects on the application of the fibre push-in test.
  • [2011] Comportamiento a fractura de aleaciones W-V: influencia de los aleantes y el procesamiento.
  • [2011] Directionally Solidified Eutectic and Advanced Ceramics Preface
  • [2011] Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites
  • [2011] Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites.
  • [2011] Mechanical properties of tungsten alloys with Y2O3 and titanium additions
  • [2011] Mechanical properties of tungsten alloys with Y2O3 and titanium additions
  • [2011] Mechanical properties of tungsten alloys with Y2O3 and titanium additions
  • [2011] Mechanical properties of tungsten alloys with Y2O3 and titanium additions.
  • [2011] Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics.
  • [2011] Microstructural and mechanical study of AL2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method
  • [2011] Microstructural and mechanical study of AL2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method
  • [2011] Microstructure and mechanical properties of Al2O3/Er3Al5O12 eutectic rods grown by the laser-heated floating zone method
  • [2011] Microstructure and mechanical properties of Al2O3/Er3Al5O12 eutectic rods grown by the laser-heated floating zone method.
  • [2011] Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by Powder Injection Moulding.
  • [2011] Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing
  • [2011] Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing.
  • [2011] Multiscale modeling of composite materials: a roadmap towards virtual testing
  • [2011] Virtual mechanical testing of composites: from materials to components.
  • [2010] An experimental and Numerical Study of the Influence of local Effects on the applications of the fibre push-in test
  • [2010] An experimental and numerical study of the influence of local effects on the application of the fibre push-in tests
  • [2010] Comportamiento en Fractura de un fieltro de fibra de vidrio
  • [2010] Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study
  • [2010] Discrete dislocation dynamics analysis of the effect of lattice orientation on void growth in single crystals
  • [2010] Discrete dislocation dynamics analysis of the effect of lattice orientation on void growth in single crystals
  • [2010] Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates
  • [2010] Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites
  • [2010] Mecanismos de Deformación en laminados de matriz polimérica correlación digital de imágenes y micromecánica computacional
  • [2010] Mechanical properties of Y2O3-doped W-Ti alloys
  • [2010] Metal Matrix Composites
  • [2009] An Analysis of the Size Effect on Void Growth in Single Crystals using Discrete Dislocation Dynamics
  • [2009] An analysis of void growth using discrete dislocation dynamics
  • [2009] Comportamiento mecánico de Wolframio
  • [2009] EXTRACTING IN-SITU THE MECHANICAL PROPERTIES OF THE POLIMERIC MATRIX IN COMPOSITES THROUGH IN-SITU NANOINDENTATION TESTS
  • [2009] Effect of Interface Fracture on the Tensile Deformation of Fiber-Reinforced Elastomers
  • [2009] Failure Surface of Epoxy-Modified Fiber-Reinforced Composites Under Transverse Tension and Shear
  • [2009] Failure analysis of impacted hybrid laminate composites using X ray tomography
  • [2009] Finite Deformation of Incompressible Fiber-Reinforced Elastomers: A Computational Micromechanics Approach
  • [2009] Influencia de la composición y microestructura sobre las propiedades mecánicas de aleaciones de wolframio.
  • [2009] MECHANICAL BEHAVIOR OF COMPOSITE MATERIALS IN SHEAR: EXPERIMENTS AND SIMULATIONS
  • [2009] Mechanical Behavior of W-Y2O3 and W-Ti Alloys from 25 A degrees C to 1000 A degrees C
  • [2009] Mechanisms of Shear Deformation in Fiber-Reinforced Polymers: Experiments and Simulations
  • [2009] Strength and Toughness of Cellular SiC at Elevated Temperature
  • [2008] Dislocation Dynamics in Non-conves Domains using Finite Elements with Embedded Discontinuities
  • [2008] Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear
  • [2008] Finite Deformation of Porous Elastomers: A Computational Micromechanics Approach
  • [2008] Fracture Toughness and Strength of Al2O3-Y3Al5O12 and Al2O3-Y3Al5O12-ZrO2 Directionally-Solidified Eutetic Oxides up to 1900K
  • [2008] Influence of the Loading Path on the Strength of Fiber-Reinforced Composites Subjected to Transverse Compression and Shear
  • [2008] Mechanical Properties of Wood-Derived Silicon Carbide Aluminum-Silicon-Magnesium Composites as a Function of Temperature
  • [2008] Numerical Simulations of Void Linkage in Model Materials using a Nonlocal Ductile Damage Approximation
  • [2008] Prediction of the Failure Locus of C/PEEK Composites under Transverse Compression and Longitudinal Shear Through Computational Micromechanics
  • [2008] Processing, microstructure and mechanical behavior of SiC-based ceramics via naturally derived scaffolds
  • [2008] Surface Modification of Al2O3–ZrO2(Y2O3) Eutectic Oxides by Laser Melting: Processing and Wear Resistance
  • [2007] Alumina/Zirconia Micro/nanocomposites, a New Material for Biomedical Applications with Superior Sliding Wear Resistance
  • [2007] Computational Issues in the Simulation of Two-dimensional Discrete Dislocation Mechanics.
  • [2007] Degradación ambiental de las propiedades mecánicas de fibras monocristalinas de circona dopada con erbia
  • [2007] Degradación de propiedades mecánicas en fibras monolíticas de circona dopada con erbia.
  • [2007] Environmental degradation of the mechanical properties of single-crystal erbia-doped zircona fibers
  • [2007] Finite deformation of porous elastomers: a computational micromechanics approach
  • [2007] Linkage in Model Materials using a Nonlocal Ductile Damage Approximation.
  • [2007] MODELIZACIÓN NUMÉRICA DEL DAÑO EN MATERIALES COMPUESTOS DE MATRIZ POLIMÉRICA
  • [2007] Mechanical Behavior of Unidirectional Fiber-Reinforced Polymers under Transverse Compression: Microscopic Mechanisms and Modelling.
  • [2007] Micromechanics of Elasto-plastic Materials Reinforced with Ellipsoidal Inclusions.
  • [2007] Micromechanics of Particle-reinforced Elasto-viscoplastic Composites: Finite Element Simulations Versus affine Homogenization
  • [2007] Numerical Simulation of the Fracture Behavior of Ti/SiC Composites Between 20ºC and 400ºC
  • [2007] Numerical simulations of void linkage in model materials using a nonlocal ductile damage
  • [2007] PROPIEDADES MECANICAS Y SENSIBILIDAD A LAS ENTALLAS DE FIELTROS DE FIBRAS
  • [2007] Ultra-High Strength Nanofibrillar Al2O3-YAG-YSZ Eutectics.
  • [2007] Virtual Fracture Testing of Fiber-reinforced Composites: A Computational Micromechanics Approach
  ...
  mostrar más
• Capítulos de libros
  • [2018] Multiscale FE modelling and design of composite laminates under impact
  • [2017] The Structural Integrity of Carbon Fiber Composites
  • [2016] Microscale Characterization Techniques of Fibre-Reinforced Polymers
  • [2015] Computational micromechanics strategies for the analysis of failure in unidirectional composites
  • [2015] Virtual testing of velocity impact in c/epoxy laminates
  • [2011] Advances and challenges in the computational simulation of composites
  • [2011] Advances and challenges in the computational simulation of composites.
  • [2011] Desgaste en función de la temperatura de recubrimientos eutécticos, Al2O3-ZrO2(Y2O3), obtenidos por fusión zonal por láser
  • [2011] Desgaste en función de la temperatura de recubrimientos eutécticos, Al2O3-ZrO2(Y2O3), obtenidos por fusión zonal por láser
  • [2011] Fundamental Applications: Solid Mechanics
  • [2011] Virtual mechanical testing of composites: from materials to components
  • [2011] Virtual mechanical testing of composites: from materials to components.
  • [2007] Finite Element and Homogenization Modelling of Materials
  ...
  mostrar más
• Conferencias invitadas en congresos
  • [2019] A multiscale modelling strategy to predicl precipitate stability, nucleation and growth in metallic alloys
  • [2019] A roadmap for multiscale modelling of precipitation and precipitation hardening in metallic alloys from first principles simulations
  • [2019] Bottom-up multiscale modelling strategies to discover new materials
  • [2019] Determination of precipitate strengthening in Al-Cu alloys through micropillar compression: experiments and multiscale simulations
  • [2019] First principles calculation of the Al-rich part of Al-Cu phase diagram
  • [2019] Metal-ceramics nanolaminates: a new paradigm in metal-ceramic composites
  • [2019] Multiscale modelling of precipitation and precipitation hardening in Al-Cu alloys from first principles simulations
  • [2019] Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation
  • [2019] Multiscale modelling of precipitation hardening in metallic alloys
  • [2019] Multiscale modelling of precipitation in metallic alloys
  • [2019] Multiscale modelling strategies for alloy design
  • [2019] On the Effect of Grain Boundaries on the Strength of Polycrystals: Hall-Petch Revisited
  • [2019] On the use of multiscale modelling strategies to design precipitation-hardened Al alloys
  • [2019] Precipitate strengthening in Mg alloys: atomistic simulations and experimental observations
  • [2019] Precipitation hardening in light alloys: why is it more efficient in Al alloys than in Mg alloys?
  • [2019] Slip transfer at grain boundaries in pure Al
  • [2018] A roadmap for multiscale modelling of processing and properties of metallic alloys
  • [2018] A roadmap for multiscale modelling of processing and properties of metallic alloys
  • [2018] An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
  • [2018] Deformation mechanisms of Cu/Nb nnanoscale metallic multilayers as a function of temperature and layer thickness
  • [2018] Effect of grain size on the strength of FCC polycrystals: strain gradient and mean free path contributions
  • [2018] Effects of layer thickness on the mechanical behavior of oxidation strengthened Zr/Nb nanoscale multilayers
  • [2018] High temperature performance of metallic nanoscale multilayers
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Precipitation in Al?Cu alloys: A multiscale analysis based on first principles calculations
  • [2018] Understanding the effect of grain boundaries on polycrystal deformation
  • [2017] A multiscale modelling roadmap for virtual processing and virtual testing of metallic materials
  • [2017] A roadmap for virtual design of metallic materials: from atoms to components
  • [2017] An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
  • [2017] Grain size effects in polycrystalline homogenization: strain gradient and mean-free path contributions
  • [2017] Integration of multiscale experiments & multiscale materials models: the path towards virtual testing
  • [2017] Microstructure-based modeling of the fatigue performance of metallic alloys: current status and challenges
  • [2017] Multiscale modelling of plasticity: towards virtual tests of metallic materials
  • [2017] On the effect of grain size on the strength of FCC polycrystals: a multiscale approach
  • [2017] Precipitate strengthening of Al-Cu alloys: A multiscale dislocation dynamics approach
  • [2016] A ROADMAP FOR VIRTUAL TESTING AND VIRTUAL PROCESSING OF CAST METALLIC MATERIALS
  • [2016] A ROADMAP FOR VIRTUAL TESTING AND VIRTUAL PROCESSING OF CAST METALLIC MATERIALS
  • [2016] A multiscale modeling strategy for virtual processing and virtual testing of cast metallic components
  • [2016] Ballistic performance of needlepunched nonwoven fabrics: experiments and modelling
  • [2016] MICROSCALE & MESOSCALE MECHANICAL CHARACTERIZATION FIBER-REINFORCED COMPOSITES
  • [2016] Mechanical Properties of Metal-Ceramic Nanolaminates: Effect of Constrain and Temperature
  • [2016] Multiscale computational mechanics of structural materials: composites & metals
  • [2016] Multiscale micromechanical model of needlepunched nonwoven fabrics
  • [2016] Multiscale modelling strategies for virtual processing and virtual testing of metallic alloys
  • [2015] A novel multiscale approach to predict the mechanical behavior of polycrystalline Ni-based superalloys
  • [2015] A roadmap towards a bottom-up design approach for composites
  • [2015] High temperature mechanical behaviour of metallic and metal-ceramic nanoscale multilayers
  • [2015] High temperature mechanical behaviour of nanoscale multilayers
  • [2015] Metal-ceramic nanolaminates: a new paradigm in metal-ceramic composites
  • [2015] Multiscale modelling of impact in composite materials and structures
  • [2015] Multiscale modelling of polycrystalline Mg alloys based on critical experiments and computational homogenization
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests by means of computational homogenization
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to AZ31 and MN11 Mg alloys
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to Mg alloys.
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to Mg alloys.
  • [2014] Finite Element Models for Polycrystalline Homogenization
  • [2014] High temperature nanomechanics of nanocomposites
  • [2014] Modeling of a Ni-based superalloy: from micro-pillar compression tests to polycrystalline models
  • [2014] Multiscale moldelling of impact in composites: a success story
  • [2014] Novel experimental and simulation strategies to determine the single crystal properties of Mg alloys
  • [2014] Size effects during micropillar compression of LiF single crystals: the effect of temperature
  • [2014] Size effects in micropillar compression: the effect of temperature
  • [2013] Anisotropy of the mechanical response of Al/SiC multilayers
  • [2013] Discrete (MD) and continuum (DD) simulations of void growth in single crystals
  • [2013] High temperature mechanical behaviour of Al/SiC multilayers
  • [2013] High temperature mechanical behaviour of nanoscale multilayers
  • [2013] High temperature mechanical characterization and modeling of Al/SiC nanolaminates
  • [2013] High temperature mechanical properties of nanoscale metallic multilayers
  • [2013] High-temperature mechanical properties of physical vapour deposited (PVD) and accumulative roll-bonded (ARB) Cu/Nb nanoscale metallic multilayers
  • [2013] In-Situ Analysis of the deformation mechanisms in Mg alloys between 50-250°C
  • [2013] Latent hardening size effect in small-scale plasticity
  • [2013] Multicale materials modelling: success stories and current challenges
  • [2013] Multiscale design of nano-engineered structural composites
  • [2013] Simulating is beliving: the role of simulation in nanomechanics
  • [2012] Fracture of heterogeneous materials: a microstructural perspective
  • [2012] Multiscale modelling of composites: a roadmap towards virtual testing
  • [2012] Nanoscale metallic and metal-ceramic multilaters for radiation-resistant applications
  • [2012] Optimization of the mechanical behavior of composites under impact by means of multiscale modeling
  • [2012] Simulation of size effects in the growth of cylindrical voids by means of dislocation dynamics and molecular dynamics
  • [2012] Virtual testing of composites: roadmap, lessons learned and necessary breakthroughs
  • [2011] Advances and challenges in the computational simulation of composites
  • [2011] Effect of cure cycle on void distribution and mechanical properties of polymer-matrix composites
  • [2011] Effect of ion irradiation on the micropillar compression of LiF single crystals
  • [2011] In-Situ Analysis of deformation and recrystallization mechanisms in Magnesium Alloys
  • [2011] In-situ analysis of deformation and recrystallization mechanisms
  • [2011] MODELIZACIÓN NUMÉRICA DEL COMPORTAMIENTO MECÁNICO DE UN FIELTRO DE POLIPROPILENO
  • [2011] Multiscale modeling of microstructure evolution during cold rolling
  • [2011] Virtual mechanical testing of composites: from materials to components
  • [2008] AN ANALYSIS OF FAILURE IN COMPOSITE MATERIALS USING IMAGE-BASED COMPUTATIONAL MICROMECHANICS
  • [2008] Numerical Simulation of Damage in Polymeric Matrix Composites
  • [2008] VOID COALESCENCE IN MODEL MATERIALS: EXPERIMENTAL RESULTS AND NUMERICAL SIMULATIONS
  • [2008] Virtual Testing of Composite Laminate Coupons
  • [2007] A TALE OF MATERIALS DEVELOPMENT: ULTRA-HIGH STRENGTH NANOFIBRILLAR Al2O3-YAG-YSZ EUTECTICS
  • [2007] AN ANALYSIS OF VOID GROWTH DUE TO PLASTIC DEFORMATION USING DISCRETE DISLOCATION DYNAMICS
  • [2007] Dislocation dynamics in non-convex domains. Application of the embedded discontinuity method
  • [2007] Dislocation dynamics in non-convex domains. Modeling Plasticity at Small Scales
  • [2007] FINITE DEFORMATION OF POROUS ELASTOMERS: A COMPUTATIONAL MICROMECHANICS APPROACH
  • [2007] Mechanical Behavior of Fiber-Reinforced Polymers under Transverse Compression and Shear
  • [2007] Microstructure and Fracture of Wood-Derived SiC-Al Composites
  • [2007] VIRTUAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
  • [2007] VIRTUAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
  • [2007] VIRTUAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
  • [2007] VIRTUAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
  ...
  mostrar más
• Cursos, seminarios y tutoriales
  • [2018] A roadmap for multiscale modelling of processing and properties of metallic materials
  • [2018] A roadmap for the virtual design of metallic materials: from atoms to components
  • [2018] High temperature mechanical properties of metallic and metal-ceramic nanoscale multilayers
  • [2018] Materials engineering: perspectives and trending topics
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2018] Multiscale modelling of precipitation hardening in Al-Cu alloys
  • [2017] A multiscale modelling strategy for virtual design of metallic alloys
  • [2017] A multiscale modelling strategy for virtual processing and virtual testing of metallic alloys
  • [2017] A multiscale modelling trategy for virtual processing and virtual testing of metallic alloys
  • [2017] A roadmap for virtual design of metallic materials: from atoms to components
  • [2017] A roadmap for virtual design of metallic materials: from atoms to components
  • [2017] A roadmap for virtual design of metallic materials: from atoms to components at Johns Hopkins
  • [2017] Microscale & mesocale characterisation of composites: towards a bottom-up design approach
  • [2017] Multiscale modeling of the mechanical behavior of polyurethane foams
  • [2017] Multiscale modelling of precipitation hardening in Al and Mg alloys
  • [2017] Multiscale modelling strategies for virtual processing and virtual testing of metallic alloys
  • [2015] High temperature mechanical behaviour of nanoscale multilayers
  • [2015] Multiscale modelling of impact in composites
  • [2015] Multiscale modelling of impact in composites
  • [2015] Virtual testing of polycrystalline Ni-based superalloys based on micromechanical tests and computational homogenization
  • [2014] Experimental & computational micromechanics: exploring the mechanical properties at the nm-µm scale
  • [2014] High temperature nanomechanics
  • [2014] High temperature nanomechanics
  • [2014] Towards the next generation of composite materials
  • [2013] Computational and experimental micromechanics of composites. A mature discipline?
  • [2013] High temperature nanomechanics
  • [2013] High temperature nanomechanics
  • [2013] High temperature nanomechanics
  • [2013] High temperature nanomechanics
  • [2013] High temperature nanomechanics
  • [2013] Multiscale modelling of composites: a roadmap for virtual testing
  • [2013] Multiscale modelling of composites: a roadmap for virtual testing
  • [2013] Multiscale modelling of composites: a roadmap for virtual testing
  • [2013] Multiscale modelling of composites: a roadmap towards virtual testing
  • [2013] On the quest of engineering ceramics for very high temperature structural applications
  • [2013] Plastic deformation at high temperature at nm and µm scale
  • [2013] The challenge of technology transfer from academia: a success story in materials for aerospace
  • [2012] 1. On the quest of engineering ceramics for very high temperature structural applications
  • [2012] High temperature nanomechanics
  • [2012] Multiscale modelling of composites: a roadmap for virtual testing
  • [2012] Multiscale modelling of engineering materials
  • [2012] Plastic deformation at high temperature at the micrometer and nanometer scale
  • [2011] Computational Materials Engineering of Composites
  • [2011] Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2011)
  • [2011] Computational materials engineering: an application of multiscale materials modeling
  • [2011] Multiscale Modeling of Composites
  • [2011] Multiscale Modeling of Composites
  • [2011] Multiscale Modeling of Composites: a roadmap towards virtual testing
  • [2011] Multiscale Modeling of Composites: a roadmap towards virtual testing
  • [2011] Multiscale Modeling of Composites: a roadmap towards virtual testing
  • [2011] Multiscale modeling of composites
  • [2011] Multiscale modeling of composites: a roadmap towards virtual testing
  • [2011] Multiscale modeling of composites: roadmap towards virtual testing
  • [2011] Multiscale simulation of structural composites
  • [2011] Plasticity 2012
  • [2011] Virtual testing of structural composites for high performance applications
  • [2010] Computational Materials Engineering: An application of Multiscale Materials Modeling.
  • [2010] Computational Materials Engineering: an application of multiscale modelling.
  • [2010] Virtual testing of composites: from materials to components
  • [2008] Discrete Dislocation Dynamics: a powerful strategy to study size effects in crystalline materials at the micron scale.
  ...
  mostrar más
• Libros
  • [2010] Comportamiento Mec¿co en funci¿e la temperatura de aleaciones de Wolframiovanadio
  • [2010] El dilema de la Energía Nuclear: Solucion o Problema.
  • [2010] Microestructuras y propiedades mec¿cas de fibras cer¿cas eut¿icas AL2O3/Er3Al5O12/ZrO2 procesadas por fusi¿onal por l¿r
  • [2009] Problemas de Materiales Compuestos
  ...
  mostrar más
• Otras Publicaciones
  • [2014] Determinación de propiedades de monocristales a partir de ensayos mecánicos en policristales: Aplicación a aleaciones de Magnesio.
  • [2008] Computational Micromechanics of Fiber-reinforced Elastomers
  • [2008] MULTISCALE MODELING OF STRUCTURAL COMPOSITES: DEVELOPMENT OF STRATEGIES FOR VIRTUAL TESTING
  • [2008] Mechanical Properties of Interpenetrating Al-SiC Composites Derived from Wood Templates
  • [2008] Three Dimensional (3D) Microstructure-based Modeling of Interfacial Decohesion in Particle Reinforced Metal Matrix Composites (MMCs)
  ...
  mostrar más
• Otros méritos
  • [2019] Miembro del comité editorial de Modelling and Simulation in Materials Science and Engineering, Composites Science and Technology, Materials Science and Engineering A, International Journal of Engineering Sciences, Integrating Materials and Manufacturing Innovation, International Journal of Multiscale Computational Engineering y Advanced Theory and Simulation
  • [2019] Profesor invitado, Central South University, China
  • [2017] Profesor invitado, Central South University, China
  • [2016] Miembro del comité editorial de "International Journal of Engineering Sciences"
  • [2016] Miembro del comité editorial de "Materials Science and Engineeering A"
  • [2016] Miembro del comité editorial de "Modelling and Simulation in Materials Science and Engineering"
  • [2016] Miembro del comité editorial de Composites Science and Technology
  • [2016] Miembro del comité científico asesor del Instituto de Materiales de Georgia Tech (Instituto Tecnológico de Georgia)
  • [2016] Profesor invitado, Central South University, China
  • [2015] Profesor invitado, Shanghai Jiatong University
  • [2012] Miembro del European Solid Mechanics Conferences Committee, del Multiscale Modelling of Materials Conferences International Advisory Board, y del International Advisory Board of the Materials Science and Surface Institute (University of Limerick)
  • [2012] Miembro del comité editorial de Modelling and Simulation in Materials Science and Engineering, Composites Science and Technology, Materials Science and Engineering A, International Journal of Fatigue and Fracture of Engineering Materials and Structures (2004-2011), International Journal of Engineering Science, y Revista de Metalurgia del CENIM
  • [2010] Elegido Académico de la Real Academia de Ciencia de Zaragoza
  • [2010] European Solid Mechanics Conferences Comité y del Multiscale Modelling of Materials
  • [2010] MIembro del consejo editor de International Journal of Engineering Science
  • [2010] Miembro de la Revista de Metalurgia del CENIM
  • [2010] Miembro del consejo editor de International Journal of Fatigue y Fracture of Engineering Materials y Structures
  • [2010] Miembro del consejo editor de Modelling y Simulation in Materials Science y Enginnering
  • [2009] European Solid Mechanics Conferences Comité y del Multiscale Modelling of Materials Conferences Internacional Advisory Board
  • [2009] Miembro de la Sociedad Española de Integridad Estructural-Grupo Español de Fractura
  • [2009] Miembro del Comité editorial de las revistas "Fracture and Fatigue of Engineering Materials and Structures" y "Revista de Metalurgia del CENIM".
  • [2009] ¿ Elegido Académico de la Real Academia de Ciencia de Zaragoza
  • [2009] ¿{ Es miembro del consejo editor de las revistas: ¿{ Modelling and Simulation in Materials Science and Enginnering - International Journal of Fatigue and Fracture of Engineering Materials and Structures - International Journal of Engineering Science ¿{ Revista de Metalurgia del CENIM
  ...
  mostrar más
• Patentes
  • [2010] Método de diseño de un cable de fibras sintéticas
  • [2010] Procedimiento para mejorar la resistencia a compressión de fibras de PBO, y fibras de PBO obtenidas mediante dicho procedimiento,
• Ponencia en Congresos
  • [2019] An analysis of the deformation and fracture mechanisms of Cu/Nb nanolaminates by in situ TEM mechanical tests
  • [2019] An experimental analysis of the effect of precipitate strengthening on the mechanical response of Al-Cu alloys by means of micropillar compression
  • [2019] Effect of nucleating particles on the microstructure of 7075 Al alloy manufactured by selective laser melting
  • [2019] High-Throughput measurements for the micro-mechanical plastic deformation in Mg-Al alloys
  • [2019] Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation
  • [2018] A SPH modelling approach for physics and solid mechanics of enginnering applications
  • [2018] Additive manufacturing of aluminum alloys
  • [2018] An analysis of the effect of Al content on the critical resolved shear stress for basal slip in Mg by means of micropillar compression
  • [2018] An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
  • [2018] An atomistic investigation of the interaction of dislocations with Guinier-Preston zones in Al-Cu alloys
  • [2018] An atomistic stategy to determine the activation energy for dislocation interaction with Guinier-Preston zones in Al-Cu alloys
  • [2018] An experimental analysis of the effect of precipitate strengthening on the mechanical response of Al-Cu alloys by means of micropillar compression
  • [2018] Atomistic and continuum approaches to analyse precipitation hardening in metallic alloys
  • [2018] Ballistic Performance of Nonwoven Fabrics for Lightweight Armours
  • [2018] Compositional dependence of the energy and kinetic coefficient anisotropy in the Al-Cu binary system: a molecular dynamics study
  • [2018] Computational micromechanics and homogenization of anisotropic polyurethane foams
  • [2018] Discrete dislocation dynamics simulations of precipitation hardening in Al-Cu alloys
  • [2018] Effect of Al content on the critical resolved shear stress for basal slip in Mg alloys by micropillar compression
  • [2018] Effect of orientation on the deformation and fracture mechanisms of Cu/Nb nanolaminates by in-situ TEM mechanical tests
  • [2018] Effect of precipitates on the critical resolved shear stress for basal slip in Mg-4 (wt. %) Zn alloy
  • [2018] Experimental analysis of the effect of Al solid solution on the critical resolved shear stress for basal slip and twinning in Mg as a function of temperature
  • [2018] On the effect of stress-free transformation strains and dislocation cross-slip in precipitate strengthening in Al-Cu alloys
  • [2018] Simulation of slip transfer in tensile deformed bicrystals using a dislocation density based crystal plasticity model
  • [2018] Slip transfer at grain boundaries in Al: experimental results and numerical simulations
  • [2017] Anisotropy and Microstructure in 3D Printed IN 718
  • [2017] Anisotropy and Microstructure in 3D Printed IN 718t. ,
  • [2017] Atomistic simulations of dislocation/precipitate interactions in Mg-Al alloys
  • [2017] Ballistic Performance of needle-punched nonwoven fabrics: experiments and simulations
  • [2017] Grain orientation effects and void growth in titanium: three-dimensional experiments and crystal plasticity simulations
  • [2017] Modeling of fatigue fracture of Inconel 718 by means of crystal plastic and computational homogenization
  • [2017] Mutiscale modelling of theta? precipitation during aging of Al-4wt.%Cu alloys
  • [2017] Numerical modeling of the ballistic behavior of a needlepunched nonwoven
  • [2017] Phase field modelling of ?' precipitation during aging of Al-4wt.%Cu alloys: a multiscale approach
  • [2017] Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers interactions in Mg-Al alloys
  • [2017] Strengthening of Mg-Al alloys by precipitates: An atomistic analysis
  • [2016] A versatile multiscale framework for the mechanical simulation of nonwovens
  • [2016] Anisotropy, size, and aspect ratio effects in micropillar compression of Al-SiC nanolaminate composites
  • [2016] Competing deformation mechanisms in Cu/Nb nanolaminates as a function of layer thickness and temperature
  • [2016] Dual scale vacuum infiltration of fiber-reinforced composites: from in situ synchrotron experiments to numerical simulations
  • [2016] In situ synchrotron experiments of crack nucleation and propagation in Ni-based superalloys: experimental results and crystal plasticity modelling
  • [2016] Mechanical Properties of Metal-Ceramic Nanolaminates: Effect of Constrain and Temperature
  • [2016] Microstructure based simulation of fatigue of superalloy Inconel 718
  • [2016] Multiscale modeling of IN718 superalloy based on micropillar compression and computational homogenization
  • [2016] Multiscale modelling of the mechanical behavior polyurethane foams
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2016] On the effect of fibre shape in fiber reinforced polymers: strength and toughness
  • [2015] 3D dislocation dynamics analysis of the size effect on LiF micropillars at 300K and 600K
  • [2015] A level set method for vacuum infusion of composite materials
  • [2015] Crystal plasticity modeling of a polycrystalline superalloy: from microstesting to macroscopic behaviour
  • [2015] Deformation mechanisms and microstructure evolution of needlepunched nonwoven fabrics
  • [2015] Efecto de sensibilidad inversa a entalla en un nonwoven de polipropileno
  • [2015] Experimental Determination of the Mode II Cohesive Law of UD Hybrid Composite Interfaces using Full Displacement Fields
  • [2015] Experimental determination of the mode II cohesive law of UD hybrid composite interfaces using full displacement fields
  • [2015] Extraction of crystal plasticity parameters of IN718 using high yemperature micro-compression
  • [2015] High temperature mechanical behaviour of nanoscale multilayers
  • [2015] High temperature micropillar compression of PVD Cu/Nb nanoscale metallic multilayers
  • [2015] Inverse notch sensitivity in a thermally bonded nonwoven
  • [2015] Lagrange-Rayleigh Description of Polycrystalline Martensitic Transformation
  • [2015] Multiscale characterization strategy for the microstructure and the mechanical properties of polyurethane foams
  • [2015] Multiscale dual phase flow in vacuum infusion
  • [2015] UD ply property prediction using computational micromechanics: experiments and simulations
  • [2015] Virtual testing of polycrystalline Ni-based superalloys: from single crystals to design allowables
  • [2014] A 3D dislocation dynamics analysis of the development of size effects at high temperature during micropillar compression ol LiF [111] single crystals
  • [2014] A stable X-FEM in cohesive transition from closed to open crack
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to Mg alloys
  • [2014] An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: application to Mg alloys.
  • [2014] An inverse optimization strategy to obtain single crystal mechanical properties from polycrystal tests: application to Mg alloys
  • [2014] Analysis of transverse cracking in unidirectional composite plies by means of computational micromechanics
  • [2014] Combined multiscale simulations in fiber-reinforced composites
  • [2014] Crystal plasticity modelling of polycrystalline IN718
  • [2014] Effect of Temperature on the critical resolved shear stresses of MN11 Magnesium alloy
  • [2014] Effect of Temperature on the critical resolved shear stresses of MN11 Magnesium alloy
  • [2014] In-situ study of tension and compression deformation behavior of rare-earth (Nd) containing extruded Mg-1Mn (wt%) alloys
  • [2014] Insensibilidad extrema a entalla en la fractura de un fieltro de polipropileno
  • [2014] Integrated Landau Modeling of Microstructural and Energetic Natures of A/M Transformation in Polycrystalline Q&P Steels
  • [2014] Investigation of void growth in single crystals by using Discrete (MD) and continuum (DD) simulation
  • [2014] Mechanical behaviour of hybrid 3D woven composites under static and impact loads
  • [2014] Modeling of a Ni-based superalloy: From micropillar compression to polycrystalline models
  • [2014] Modelization of advanced nonwoven fabrics subjected to tensile loads
  • [2014] Multiscale modeling of a small punch test on hydrostatically extruded titanium
  • [2014] Multiscale modeling of deformation in hydrostatically extruded Ti
  • [2014] On the use of DIC-3D to determine the poermability tensor and compaction law of fabric by VARTM
  • [2014] Size effects during micropillar compression: the effect of temperature and lattice resistance
  • [2014] Thermo-mechanical damage due to lightning impact in carbon/epoxy composites: experiments and simulations
  • [2014] X-Ray computed tomography analysis of deformation and damage mechanisms of fiber-reinfoced composites in shear
  • [2013] Crystal Plasticity Modeling of Magnesium Alloys
  • [2013] Damage mechanisms of 3D woven hybrid composites loaded in tension: testing, inspection and simulation
  • [2013] Development of a crystal plasticity model for Mg alloys
  • [2013] Effect of interface properties on the compressive behaviour of Al/SiC nanolaminates at high temperature
  • [2013] Evaluating the plastic anisotropy of AZ31 using microscopy techniques
  • [2013] Hierarchical mechanisms of energy dissipation at the nm and µm scale during fracture of advanced fiber-reinforced composites
  • [2013] High fidelity simulations of the mechanical behaviour of composite materials and structures for wind turbines
  • [2013] High temperature nanoindentation of microstructural constituents in a Sn-rich Pb-free solder
  • [2013] High-temperature mechanical properties and microstructure correlation of physical vapour-deposites and accumulative roll bonded Cu/Nb nanoscale multilayers
  • [2013] High-velocity impact of 3D woven composites: ballistic curve and failure mechanisms
  • [2013] Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation
  • [2013] Multiscale modeling of a small punch test on nanostructured CP titanium
  • [2013] Multiscale modeling of a small punch test on nanostructured CP titanium
  • [2013] Multiscale modelling of deformation of polycrystalline nanostructured Ti
  • [2013] On the use of in situ SEM testing and simulation to study deformation and failure mechanisms in composite materials
  • [2013] Temperature-dependent size effects in LiF [111] single crystals
  • [2013] The effect of Neodymium on the deformation behavior of extruded Mg-1Mn(wt%)
  • [2013] X-ray tomographic investigation of damage evolution of sequential tensile deformation of ±45º plain and open hole carbon fibre laminates
  • [2013] X-ray tomography assessment of shear damage in carbon fiber laminates
  • [2012] A constitutive model for the tensile behavior of nonwovens
  • [2012] A novel methodology to determine the mechanical properties of amorphous materials through instrumented nanoindentation
  • [2012] Analysis of curing cycle efect on processing voids distribujtion and mechanical properties of a polymer composite material
  • [2012] Caracterización de tubos de fibroína para regeneración nerviosa obtenidos mediante electrospinning
  • [2012] Detailed damage mechanisms assessment in composite materials by means of X-ray tomography
  • [2012] Determination of the mechanical properties of amorphous materials through instrumented indentation
  • [2012] Discrete (MD) and continuum (DD) simulations of void growth in single crystals
  • [2012] Effect of tilt on the micropillar compression of plastically anisotropic single-crystals
  • [2012] High temperature mechanical behaviour of nanoscale multilayers
  • [2012] High temperature mechanical properties of Cu/Nb nanoscale multilayers
  • [2012] High temperature nanoindentation behavior of Al/SiC nanoscale multilayers
  • [2012] In situ analysis of the deformation & fracture mechanisms of Ti-45Al-2Nb-2Mn-0.8v.%TiB2 at high temperature
  • [2012] Mechanical characterization of nanolayered Al/SiC composites by high temperature nanoindentation
  • [2012] Mechanical charaterisation of 3D woven materials against impact loads
  • [2012] Micromechanical modeling of the effect of hot-wet conditions on the mechanical behavior of composite materials
  • [2012] Micromechanical study of the failure of fiber-reinforced polymers
  • [2012] Micropillar compression of LiF between room temperature and 400ºC
  • [2012] Modelling of the low-velocity impact behaviour of 3D orthogonal hybrid woven composites
  • [2012] Multiscale modeling of acumulative roll bonding (ARB) process
  • [2012] On the controversy of grain boundary sliding in Mg AZ31
  • [2012] Simulation of size effects in the growth of cylindrical voids by means of dislocation dynamics and molecular dynamics
  • [2012] Tensile and creep deformation mechanisms in rolled AZ31
  • [2011] A discrete dislocation analysis of size effects on void growth in single crystals
  • [2011] Advances and challenges in the computational simulation of composites
  • [2011] An in-situ SEM evaluation of the fracture behavior of a ?-TiAl alloy
  • [2011] Characterization of the fiber/matrix interfacial adhesion in fibre reinforced composites by the push-in test
  • [2011] Damage and defects assessment in composite materials using X-ray computed tomography
  • [2011] Damage inspection in 3D orthogonal woven composites and plain weave fabrics subjected to both static and impact loads. Testing and simulation
  • [2011] Deformation and damage mechanisms in composite materials by in situ SEM testing
  • [2011] Deformation and fracture micro-mechanisms through in situ SEM testing and digital image correlation
  • [2011] Effect of cure cycle on void distribution and mechanical properties of polymer-matrix composites
  • [2011] Effect of ion irradiation on the micropillar compression of LiF single crystals
  • [2011] Experimental assessment of processing defects on the mechanical properties of a composite material by X-ray tomography
  • [2011] In-Situ Analysis of deformation and recrystallization mechanisms in Magnesium Alloys
  • [2011] Influence of Processing and Alloying Method in Fracture Behaviour of Tungsten-Vanadium Alloys for ITER
  • [2011] Matrix cracking and crack deflection in unidirectional fiber reinforced composite laminates
  • [2011] Matrix cracking and crack deflection in unidirectional fiber reinforced composite laminates
  • [2011] Mechanical behaviour of tungsten-vanadium-lanthana alloys as function of temperature
  • [2011] Mechanical properties of tungsten alloys with vanadium addition
  • [2011] Mechanical testing and simulation of 3D orthogonal interlocked fabric composites
  • [2011] Multiscale modeling of cold rolling in FCC and HCP metallic alloys
  • [2011] Multiscale modeling of microstructure evolution during cold rolling
  • [2011] Multiscale modeling of polycrystalline materials: a numerical implementation of the VPSC scheme into an implicit FE code
  • [2011] Sequential stages of crack propagation in pre-notched glass fiber/epoxy cross-ply composites studied by XCT
  • [2011] Simulation of damage in composite laminates using X-FEM including experimental validation with X-ray tomography
  • [2011] Simulation of size effects in the growth of cylindrical voids by means of dislocation dynamics and molecular dynamics
  • [2011] Simulation of the through-thickness texture gradient and of the mechanical behavior of pure Zr processed by accumulative roll bonding
  • [2011] Size effects in micropillar compression of LiF single crystals fabricated without exposure to ion irradiation
  • [2011] Virtual mechanical testing of composites: from materials to components
  • [2010] A finite element implementation of a polycrystalline Material based on the viscoplastic self-consistent model
  • [2010] Comportamiento mecánico en función de la temperatura de aleaciones wolframio-vanadio.
  • [2010] Computational modeling of deformation and fracture of nonwoven felts
  • [2010] Discrete Dislocation Dynamics Simulations of Void Growth in FCC single Crystals
  • [2010] Effect of glass fiber hybridization on the impact resistance of woven carbon fiber/epoxy laminates
  • [2010] Mechanical behavior with temperature of cellular SiC
  • [2010] Mechanical properties Al2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method
  • [2010] Mechanical properties of directionally solidified Al2O3/Er3Al5O12/ZrO2 eutectic ceramics up to 1900 K.
  • [2010] Microestructura y propiedades mecánicas de fibras cerámicas eutécticas Al2O3/Er3Al5O12/ZrO2 procesadas por fusión zonal por láser.
  • [2010] Micromechanics of Polypropilene nonwoven felts: Experimental characterization and nuemrical modelling
  • [2010] Microstructure and high temperature mechanical properties of directionally solidified Al2O3/Er3Al5O12 eutectic ceramics
  • [2010] Modelling the interaction between matrix cracking and delamination in angle ply laminates. XFEM analysis of the interaction between ply failure by splitting and delamination
  • [2010] Multiscale modeling of polycrystalline materials: A numerical implementation of the VPSC scheme into an implicit FE code 2ndInternational Symposium on Computational Mechanics of Polycrystals
  • [2010] Superplastic behaviour of Al2O3- Y3Al5O12-YSZ eutectic oxides
  • [2010] Virtual Testing of Composites from materials to components
  • [2010] Void growth in polycrystals using 2D dislocation dynamics
  • [2009] Influencia de la composición y microestructura sobre las propiedades mecánicas de aleaciones de wolframio
  • [2009] Mechanical Properties of Tungsten Alloys with Y2O3 and Titanium Additions
  • [2009] Mechanical behavior of cellular SiC at high temperature
  • [2009] Study of Al2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method
  • [2008] Failure Criteria for Composite Materials under Multiaxial Stress States
  • [2007] Dislocation dynamics in non-convex domains. Modeling Plasticity at Small Scales
  • [2007] Finite deformation of porous elastomers: a computational micromechanics approach
  • [2007] MODELIZACIÓN NUMÉRICA DEL DAÑO EN MATERIALES COMPUESTOS DE MATRIZ POLIMÉRICA
  • [2007] Modelización numérica del daño en materiales compuestos de matriz polimérica
  • [2007] Modelling Low Velocity Impact in C/epoxy Laminates
  • [2007] PROPIEDADES MECANICAS Y SENSIBILIDAD A LAS ENTALLAS DE FIELTROS DE FIBRAS
  • [2007] SIMULACIÓN MULTIESCALA DEL COMPORTAMIENTO MECÁNICO DE MATERIALES AVANZADOS
  • [2007] VIRTUAL TESTING OF C/EPOXY LAMINATES UNDER LOW VELOCITY IMPACT
  • [2007] VIRTUAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
  ...
  mostrar más
• Premios
  • [2019] Fellow de la Materials Research Society
  • [2018] Premio a la mejor carrera científica, Sociedad Española de Materiales (SOCIEMAT)
  • [2018] Premio de División de Materiales Estructurales de TMS al mejor artículo publicado en JOM en 2017
  • [2018] Premio extraordinario de doctorado del Dr. L. W. Yang
  • [2018] Premio extraordinario de doctorado del Dr. X. Zhao
  • [2014] Cátedra Prof. Brahm Prakash (Indian Institute of Science)
  • [2014] Profesor invitado, Shanghai Jiatong University
  • [2013] Cátedra Prof. Brahm Prakash, Indian Institute of Science
  • [2013] Elegido miembro de la Academia Europea, Sección de Física e Ingeniería
  • [2013] Profesor invitado
  • [2012] Elegido Fellow de la European Mechanics Society+
  • [2012] Nombrado Profesor Invitado de Shaghai Jiao Tong University
  ...
  mostrar más
• Proyectos de I+D+i
  • [2019] ESTUDIOS AVANZADOS EN MATERIALES
  • [2019] HexaGB: Borde de Granos en microestructuras Hexagonales: Enlace de procesamiento y propiedades en aleaciones estructurales ligeras
  • [2019] MAT4.0-CM: FABRICACION INTELIGENTE DE MATERIALES AVANZADOS PARA EL TRANSPORTE, LA ENERGIA Y LA SALUD (UPM-MMEAN)
  • [2018] ESTUDIOS AVANZADOS EN MATERIALES
  • [2017] ESTUDIOS AVANZADOS EN MATERIALES
  • [2016] COMPUESTOS MULTIFUNCIONALES Y TOLERANTES AL DAÑO:INTEGRACIÓN DE NANOREFUERZOS DE CARBONO AVANZADOS Y LAMINADOS NO-CONVENCIONALES
  • [2016] ESTUDIOS AVANZADOS EN MATERIALES
  • [2015] ESTUDIOS AVANZADOS EN MATERIALES
  • [2015] MuDaTCom: Compuestos multifuncionales y tolerantes al daño. Integración de nano-refuerzos de carbono avanzados y laminados no convencionales
  • [2015] VIRMETAL: Virtual Design, Virtual Processing and Virtual Testing of Metallic Materials
  • [2014] ANÁLISIS DE LA EVOLUCIÓN MICROESTRUCTURAL Y DEL COMPORTAMIENTO MECÁNICO DE ALEACIONES DE MG-MN-RE
  • [2014] ESTUDIOS AVANZADOS EN MATERIALES
  • [2013] Análisis de la Evolución Microestructural y del Comportamiento Mecánico de Aleaciones de Mg-Mn-RE
  • [2013] Estudios Avanzados en Materiales
  • [2012] ANÁLISIS DE LA EVOLUCIÓN MICROESTRUCTURAL Y DEL COMPORTAMIENTO MECÁNICO DE ALEACIONES DE MG-MN-RE
  • [2012] ESTUDIOS AVANZADOS EN MATERIALES
  • [2011] Análisis de la Evolución Microestructural y del Comportamiento Mecánico de Aleaciones de Mg-Mn-RE
  • [2011] ESTUDIOS AVANZADOS EN MATERIALES
  • [2011] Estudios Avanzados en Materiales
  • [2010] ESTUDIOS AVANZADOS EN MATERIALES
  • [2009] 30 ENSAYOS DE TRACCION SEGÚN ASTM D3039M SORE PROBETAS DE LAMINADOS UNIDIRECCIONALES DE CARBONO/EPOXI Y ELABORACIÓN DEL INFORME TECNICO.
  • [2009] ACCION INTEGRADA HISPANO ITALIANA
  • [2009] ADVANCED MATERIALS DIVERTOR AND PLASMA FACING MATERIALS.
  • [2009] BIOANCLAJES ANCLAJES DE SIC BIOMORFICO PARA HORMIGON REFRACTARIO PROYECTADO
  • [2009] CARACTERIZACION DEL COMPORTAMIENTO MECANICO DE MATERIALE, ESTRUCTURAS
  • [2009] CARACTERIZACION Y ANALISIS DEL COMPORTAMIENTO MECANICO EN FUNCION DE LA TEMPERATURA DE OXIDOS EUTECTICOS BASADOS EN AL203 PARA LA OPTIMIZACION DE SISTEMAS DE GEN
  • [2009] CONGRESO INTERNACIONAL SOBRE EL TEMA MICROMECHANICS AND MICROSTRUCTURE EVOLUTION: MODELING, SIMULATION AND EXPERIMENTS
  • [2009] DESARROLLO DE NUEVOS CRITERIOS DE ROTURA PARA MATERIALES COMPUESTOS
  • [2009] EFECTOS DEL TAMAÑO EN EL COMPORTAMIENTO MECANICO DE MONOCRISTALES. EXPERIMENTOS Y SIMULACIONES. SUBPROYECTO I
  • [2009] EQUIPO DESEGURIDAD Y DURABILIDAD DE ESTRUCTURAS DE CONSTRUCCION ( PROGRAMA CONSOLIDER INGENIO 2010)
  • [2009] ESTUDIOS AVANZADOS EN MATERIALES
  • [2009] GRUPO DE INVESTIGACION: MATERIALES ESTRUCTURALES AVANZADOS Y NANOMATERIALES.
  • [2009] INSTITUTO DE INVESTIGACION
  • [2009] MARTERIALS WORLD NETWORK: CERMIC COMPOSITES FROM NATURAL AND SYNTHETIC SCAFFOLDS
  • [2009] MATERIALES ESTRUCTURALES AVANZADOS
  • [2009] N§ ERB BRRT-CT98-5061 ASSESSSMENT OF METAL MATRIX COMPOSITES FOR INNOVATIONS MMC-ASSESS
  • [2009] TRABAJO DE INVESTIGACIÓN SOBRE LA APLICABILIDAD DE LOS MATERIALES COMPUESTOS EN LA CONSTRUCCIÓN CIVIL
  • [2008] Equipo de seguridad y durabilidad de estructuras de construcción. SEDUREC
  • [2007] Desarrollo de nuevos criterios de rotura para materiales compuestos mediante técnicas de micromecánica computacional
  • [2007] Equipo de seguridad y durabilidad de estructuras de construcción. CONSOLIDER INGENIO-2010. Ref: CSD00C-06-14102.
  • [2007] Trabajo de Investigación sobre la Aplicabilidad de los materiales compuestos en la Ingeniería Civil
  ...
  mostrar más
• Responsabilidades
  • [2018] Miembro del comité científico asesor del Instituto de Materiales (Georgia Tech)
  • [2018] Miembro del comité editorial de Advanced Theory and Simulation
  • [2018] Miembro del comité editorial de Advanced Theory and Simulation
  • [2018] Miembro del comité editorial de Composites Science and Technology, Materials Science and Engineering A
  • [2018] Miembro del comité editorial de Integrating Materials and Manufacturing Innovation
  • [2018] Miembro del comité editorial de International Journal of Engineering Science
  • [2018] Miembro del comité editorial de International Journal of Multiscale Computational Engineering
  • [2018] Miembro del comité editorial de Modelling and Simulation in Materials Science and Engineering
  • [2018] Profesor invitado, Central South University, China
  • [2017] Miembro del comité editorial de Composites Science and Technology
  • [2017] Miembro del comité editorial de Integrating Materials and Manufacturing Innovation
  • [2017] Miembro del comité editorial de International Journal of Engineering Sciences
  • [2017] Miembro del comité editorial de International Journal of Multiscale Computational Engineering
  • [2017] Miembro del comité editorial de Materials Science and Engineering A
  • [2017] Miembro del comité editorial de Modelling and Simulation in Materials Science and Engineering
  • [2017] Miembro del comité científico asesor del Instituto de Materiales (Georgia Tech)
  • [2015] Miembro de comité científico internacional de la Conferencia de Mecánica de Sólidos de EuroMech y de la Conferencia de Modelización Multiescala de Materiales
  • [2015] Miembro del comité científico asesor del Instituto de Materiales (Georgia Tech)
  • [2015] Miembro del comité editorial de Composites Science and Technology, Modelling and Simulation in Materials Science and Engineering, Materials Science and Engineeering A, International Journal of Engineering Sciences
  • [2015] Organizador del 9th European Solid Mechanics Conference
  • [2014] Miembro de comité científico internacional de la Conferencia de Mecánica de Sólidos de EuroMech y de la Conferencia de Modelización Multiescala de Materiales
  • [2014] Miembro del comité científico asesor del Instituto de Ciencia de Materiales y de Superficies (Universidad de Limerick) y del Instituto de Materiales (Georgia Tech)
  • [2014] Miembro del comité editorial de Composites Science and Technology, Modelling and Simulation in Materials Science and Engineering, Materials Science and Engineeering A, International Journal of Engineering Sciences
  • [2013] International Workshop on Processing-Microstructure-Mechanical Property of Magnesium Alloys (organización)
  • [2013] International Workshop on the Mechanical Behavior of Nanoscale Multilayers (organización)
  • [2013] Miembro de comités científicos asesores: Instituto de Ciencia de Materiales y de Superficies (Universidad de Limerick) e Instituto de Materiales (Georgia Tech).
  • [2013] Miembro de comités científicos internacionales: Conferencia de Mecánica de Sólidos de EuroMech y Conferencia de Modelización Multiescala de Materiales
  • [2013] Miembro del comité editorial de varias revistas científicas
  • [2009] ¿ Director de la Fundación IMDEA-materiales
  • [2008] Academico de la Real Academia de Ciencias de Zaragoza
  • [2008] Miembro del comité editorial de Modelling and Simulation in Materiales Science and Engineering, International Journal of Fatigue and Fracture of Engineering Materials and Structures, del Internacional Journal of Engineering Sciences, Revista de Metalurgia del CENIM y del European Solid Mechanics Conferences Committee.
  ...
  mostrar más
• Tesis Doctorales
  • [2019] Atomistic modeling of the strengthening mechanisms in FCC and HCP metals
  • [2019] High throughput investigation of diffusion and solid solution hardening of HCP Mg alloys
  • [2018] Multiscale characterization and modelling of polyurethane foams
  • [2017] Deformation, strengthening and fracture mechanisms of nanoscale Al/SiC multilayers
  • [2017] Halogen-free phosphorus-containing flame- retardant epoxy composites
  • [2016] Coupled nonlinear Ginzburg-Landau and mechanics model for martensitic transformations in polycrystals
  • [2016] Multiscale analysis of the mechanical behavior of needle-punched nonwoven fabrics
  • [2015] Microstructure-based numerical modeling of the mechanical behavior of Mg alloys
  • [2015] Microstructure-based numerical modeling of the mechanical behavior of Mg alloys
  • [2015] Polymer interaction with macroscopic carbon nanotube fibers and fabrication of nanostructured composites
  • [2014] High Fidelity Simulations of Failure in Fiber Reinforced Composites
  • [2013] Curing, Defect and Mechanical Performance of Fiber-Reinforced Composites
  • [2011] MECHANICAL BEHAVIOR OF NONWOVEN FELTS
  • [2008] Comportamiento Mecánico de Materiales Celulares de Carburo de Silicio
  ...
  mostrar más